Swift
User Manual
-19-
End points
Setting method:
The end points function changes the range of movement available to a channel. This can be used to
limit the tilt of the Swift, therefore it is easier to control. The left box is the low end point, the right box
is the high end point, marked below as low end point being blue and red being the high end point.
1.Touch the low or high end points box.
2.Touch the desired digit to be changed, then use the onscreen up and down arrows to change it’s
value.
3.Select [√] to confirm the value, or choose [X] to quit the edit menu.
4.Select [back] to save and back to the previous menu.
