SWELLPRO S3, Руководство по эксплуатации

Страница: 7 / 16

[a] Video recording status: Blue indicates view only, red indicates received video is being
recorded to the TF/SD card.
[b] Video timer: Hour: Minute: Second.
[c] TF/SD card status: Blue indicates good card status, Red indicates no TF/SD card detected or
that the card needs to be reformatted.
[d] TF/SD card remaining capacity
[e] Internal battery charge level
[f] Receiver: RF R – signal is being processed from the right-hand receiver. RF L – signal is being
processed from the left-hand receiver.
[g] BAND: the current working band of the receiver, the working bands A – F should match the
transmission band of your drone’s transmitter.
[h] CH: the current channel of the receiver, there are eight channels per Band.
[j] 5705MHz: displays the current working frequency of the receiver
[k] current video playback speed
[m] name of the video currently playing.
[n] duration of the playing video in hours:minutes:seconds.
[p] current video playback point in hours:minutes:seconds.
[1] BAND button
• RF (FPV) mode: briefly press the BAND button to cycle the Bands A-F
• All modes: press and hold the BAND button to increase volume.
• Menu mode: briefly press the BAND button to go up or increase a value.
[2] CH button
• RF (FPV) mode: briefly press the CH button to cycle the Channel 1-8
• All modes: press and hold the CH button to decrease volume.
• Menu mode: briefly press the CH button to go down or decrease a value.
Buttons