11
©2021 SwellPro All Rights Reserved
Installation
Install the Gimbal
1. Unscrew and take off the gimbal port cover plate
using a hex screwdriver. (Equipped with SplashDrone
4)
2. Plug the gimbal connector into the drone's gimbal
port and screw it in place with a screwdriver.
Make sure the rubber ring is attached to the gimbal
connector before you screw the connector.
3. Aline the holes on the gimbal mount to the bottom
of the drone, screw in to mount the gimbal. Make sure
the camera is pointing to the front of the drone.
Install the SD Card
1.
Open the rubber sealing on the top of the camera,
insert the microSD card in the correct direction,
press the microSD card. The "click" sound
indicates that the installation is in place.
2.
After installing the microSD card, plug the rubber
seal back.
Make sure the rubber sealing is firmly in place to
ensure waterproofing.
