©2021
SwellPro
5
3. Aline the holes on the base of the gimbal to the
bottom of the drone, screw in to mount the gimbal.
Make sure the camera is pointing to the front of the
drone.
Install SD Card
1. Open the soft rubber seal on the top of the camera,
insert the Mirco SD card in the correct direction, press
the Mirco SD card, the "click" sound indicates that the
installation is in place.
2. After installing the Mirco SD card, plug the rubber seal
back.
Make sure the rubber seal is tightly plugged in to
ensure waterproofing.
•
The GC1-S supports Mirco SD cards with a maximum capacity of 128GB. Since the
camera requires fast reading and writing of high-stream video data, please use
Mirco SD cards with Class 10 or UHS-1 or above to ensure proper functioning.
•
Do not insert or unplug the Mirco SD card during aircraft shooting, as data files may
be damaged or lost.
•
Once you are done recording, stop recording and save the file. If you turn off the
power directly before saving the files, the recording file will be lost.
After Use Casing
After using the gimbal camera, you can choose not to take off the gimbal camera and
put it directly into the case with the drone. Follow the following steps to make sure the
gimbal camera is properly secure after casing.
