©2021
SwellPro
5
3. Aline the holes on the base of the gimbal to the
bottom of the drone, screw in to mount the gimbal.
Make sure the camera is pointing to the front of the
drone.
Install SD Card
1.
Open the soft rubber seal on the top of the
camera, insert the Micro SD card in the correct
direction, press the Micro SD card, the "click"
sound indicates that the installation is in place.
2.
After installing the Micro SD card, plug the
rubber seal back.
Make sure the rubber seal is tightly plugged in to
ensure waterproofing.
•
The FAC camera supports Micro SD cards with a maximum capacity of 128GB.
Since the camera requires fast reading and writing of high-stream video data,
please use Micro SD cards with Class 10 or UHS-1 or above to ensure proper
functioning.
•
Do not insert or unplug the Micro SD card during aircraft shooting, as data files may
be damaged or lost.
•
Once you are done recording, stop recording and save the file. If you turn off the
power directly before saving the files, the recording file might be damage.
After Use Casing
After using the camera, you can choose not to take off the gimbal camera and put it
directly into the case with the drone. Follow the following steps to make sure the gimbal
camera is properly secure after casing.
