GB.SILVERF120.181005
We reserve the right to alter specifications.
www.swegon.com 13
Remove the lifting lugs. Refit the bolts
and washers to the shaft end (2x).
Remove the pro-
tecting plate of the
rotor.
Slacken off the two screws holding the motor +
mounting bracket. Move the motor + mounting brack-
et to the position shown in the illustration. Secure the
motor + mounting bracket with bolts (6 bolts).
Move the motor + mounting bracket into position shown in the
illustration and temporarily secure them with two screws Place
the rotor drive belt around the motor belt pulley.
Fit the sealing plate and tube.