Swegon
Connect
20170622 We reserve the right to alter specifications.
3
Mount and use
Router status
See LED indicators on the router’s front panel for status
information.
Caption
Colour
State
Description
PWR
Green
Blinking / On
Router is ready / Router is starting
SIM
Green
On
SIM card active
WAN
Yellow
—
See Swegon Connect web manual for detailed information
DAT
Red
Blinking
Communication in progress on radio channel
See Swegon Connect web manual for detailed information about all LED indicators.
DIV
GPS
ANT
PWR
USB
ETH0
ETH1
IN0 IN1 OUT
IN0
IN1
OUT
SIM
WAN
DAT
PWR
USR
POE
SmartFlex
Setting up the router
See Swegon Connect web manual for instructions. The
document can be downloaded from www.swegon.com
Position of the router
Mount the router in a position with good mobile
communication signal strength. If necessary, use the extra
antenna (accessory) to ensure sufficient signal strength.
Mounting router on DIN rail
You can mount the router on any standard DIN rail with
the supplied DIN holder. The DIN holder can be mounted
on the bottom or on the back of the router. It is possible to
mount the holder in any direction for maximum flexibility.
When the DIN holder is mounted on the router you can
snap it onto a standard DIN rail.
Figure 7: DIN holder
Figure 6: DIN holder mounted on the back of the router
Removing router from DIN rail
Remove the router from the DIN rail by lightly pushing it
upwards so that its top part snaps out from the rail and
then fold the router out of position.
