FUNCTIONAL PARTS(TV)
4
To turn the TV power ON
Put the TV set on the correct place, connect the AC power plug to the wall outlet, then the LED indicator
lamp turns red/blue and the TV set is at Standby/work Mode. At Standby Mode, if Standby Button is pressed
the power indicator will change to blue. It takes a few seconds before the picture appears.
To turn the TV power OFF
Press the Standby Button to make the TV set in Standby Mode, then disconnect the power plug from the
wall outlet.
NOTE:
If TV is the selected input without signal received and NO operation is performed for about 5 minutes
continuously, the TV set will enter standby mode. For any inputs other than TV, the TV set will not enter
standby mode automatically without users instruction. If you are not going to use this TV set for a long
time, switch off the set and disconnect the power plug from the wall outlet.
Front View of LCD Set
1.
2. LED indicator lamp
3. V- Button
V+ Button
4. P- Button
P+ Button
5. MENU Button
6. SOURCE Button
7.
Remote Sensor
Standby Button
8.
9.
1
2
3
3
4
4
5
6
7
8
9
TV021_manual_EN.indd 5
11-01-11 15:54
Содержание TV021
Страница 1: ...CI 22 56CM...
