background image

 

SERVICE MANUAL

Parts marked with "

" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the

safety and performance of the set.

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

OUTLINE AND DIFFERENCES FROM BASE MODEL

OUTLINE.................................................................... i

DIFFERENCES FROM BASE MODEL            

(LC-40LE814E/RU) .................................................... i

DIFFERENCES FROM BASE MODEL            

(LC-46LE814E/RU) .................................................... i

DIFFERENCES FROM BASE MODEL            

(LC-40LE824E/RU) ................................................... ii

DIFFERENCES FROM BASE MODEL            

(LC-46LE824E/RU) ................................................... ii

SAFETY PRECAUTION

IMPORTANT SERVICE SAFETY 

PRECAUTION...........................................................iii

Precautions for using lead-free solder ..................... iv

End of life disposal .................................................... v

OUTLINE

MAJOR SERVICE PARTS ....................................... vi

CHAPTER 1. SPECIFICATIONS

[1] SPECIFICATIONS .................................................1-1

CHAPTER 2. OPERATION MANUAL

[1] OPERATION 

MANUAL ..........................................2-1

CHAPTER 3. DIMENSIONS

[1] DIMENSIONS ........................................................3-1

CHAPTER 4. ADJUSTMENT

[1] ADJUSTMENT 

PROCEDURE ...............................4-1

CHAPTER 5. TROUBLESHOOTING TABLE

[1] TROUBLESHOOTING 

TABLE...............................5-1

[2] 

LED flashing specification at the time of the error...5-14

CHAPTER 6. MAJOR IC INFORMATIONS

[1] MAJOR 

IC 

INFORMATIONS..................................6-1

CHAPTER 7. OVERALL WIRING/BLOCK DIAGRAM

[1] 

OVERALL WIRING DIAGRAM                             

(LC-40LE814E/RU) ................................................7-1

[2] 

OVERALL WIRING DIAGRAM                             

(LC-46LE814E/RU) ................................................7-2

[3] 

OVERALL WIRING DIAGRAM                             

(LC-40LE824E/RU) ................................................7-3

[4] 

OVERALL WIRING DIAGRAM                             

(LC-46LE824E/RU) ................................................7-4

[5] 

SYSTEM BLOCK DIAGRAM                                 

(LC-40LE814E/RU)(LC-46LE814E/RU).................7-5

[6] 

SYSTEM BLOCK DIAGRAM                                 

(LC-40LE824E/RU)(LC-46LE824E/RU).................7-6

Parts Guide

TopPage

CONTENTS

LCD COLOUR TELEVISION

No. S90K840LE814E

LC-40/46LE814/824E/RU (1st Edition)

LC-40LE814E/RU

LC-46LE814E/RU

LC-40LE824E/RU

LC-46LE824E/RU

MODELS

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used

.

OUTLINE

This Service Manual covers the differences from LC-40/46LE810E and LC-40/46LE820E.
For other technical information, refer to the LC-40/46LE810E, LC-40/46LX810E (No. S30E940LE810E) Service
Manual and LC-40/46/52LE820E, LC-40/46LU820E (No. S30F240LE820E) Service Manual.

Summary of Contents for AQUOS LC-40LE814E









































































Reviews: