Sweepster VRS Series, Руководство пользователя, Страница: 7 / 54

7
SafeTy SiGNS & labelS
SafeTy SiGNS & labelS
There are several specific signs on this sweeper.
the exact location of the hazards and description of
the hazards are reviewed.
Placement or replacement of Safety Signs
1. Clean the area of application with nonflammable
solvent, and then wash the same area with soap
and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign,
exposing the adhesive surface.
4. Apply the safety sign to the position shown in
the diagram above and smooth out any bubbles.
instructions
. Keep all safety signs clean and legible.
2. Replace all missing, illegible, or damaged safety
signs.
3. Replacement parts, for parts with safety signs
attached, must also have safety signs attached.
4. Safety signs are available, free of charge, from
your dealer or from SweePSteR.
50-0634
50-0643
item Part Qty Description
1. 50-0634 1 Label, Serial Number
2. 50-0643 2 Label, Tie Down Point
3. 50-0723 1 Label, Warning, Misuse Hazard
4. 50-0724 1 Label, Warning, High Pressure Fluid
5. 50-0727 3 Label, Warning, Flying Objects
6. 50-0737 2 Label, Warning, Pinch Point Hazard
5
2
4
6
3
5
1
6
2
5
SAFETY LABELS
50-0723
50-0724
50-0727
50-0737