SWEDX XV1-15 Series, Руководство пользователя

Страница: 7 / 20

Setup
Connecting The Monitor
1. Connect the power cord for the monitor to the power port on the back of the
monitor, Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of the
monitor and to the VGA port in the computer.
3. Turn on your computer and monitor. If your monitor displays an image, the
installation is complete.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the
computer and the monitor to exchange information automatically. This monitor
follows the international standard VESA DDC for the Plug & Play function.
Note: For updates of the monitor driver, visit our web site: http://www.swedx.com.
Navigate The OSD
MENU: Select
PC OSD Utility Auto
Auto
:Enter EXIT:Exit / /
Brightness
Contrast
Phase
Frequency
H-Position
V-Position
Sharpness
Sharp Soft Normal
100
59
48
47
50
50
1. Push the MENU button to activate the OSD.
2. Highlight the desired submenu using the +/- buttons.
3. Activate the submenu using the MENU button.
4. Activate the desired function using the MENU button.
5. Adjust the selected function using the +/- buttons.
6. To reverse one step push the EXIT button once.
User’s Manual
7