Swecoin TTP 2000, Руководство по обслуживанию

Страница: 33 / 47

Replacement parts
0701 TTP 2000 Kiosk Printer–Service Manual 33
8 REPLACEMENT PARTS
Items coded SP are standard replacement parts.
1. Screws, washers, nuts etc. are available in a common hardware store, and are thus
not supplied as replacement parts.
2. Parts that are considered as not being worn by normal printer use are not
replacement parts, for example the printer chassis.
Should you require any of these "non-replacement parts", contact Swecoin for advice.
Other price and delivery conditions may apply for non-coded items.
Standard hardware
Designation example How to interpret the designation Illustration How to
measure
Screw MRX-H M3x5 Panhead screw. Thread: M3. Length: 5 mm
Screw MFX-H M3x6 Countersunk screw. Thread: M3. Length: 6 mm
Screw M6S M6x16 Hex head screw. Thread: M6. Length: 16 mm
Screw MC6S M6x12 Allen-head screw. Thread: M6. Length: 12 mm
Screw FXS-H ST 2.9x6.5 Countersunk. Self-threading.
∅
2.9 mm. Length: 6.5 mm
Screw, RXK-H ST 2.9x8 Panhead screw, Self-threading.
∅
2.9mm. Length:8 mm
Screw RTK ST 2.9x6.5 Torx panhead. Self-threading.
∅
2.9mm. Length: 6.5 mm
Nut M6M M2 Hex nut, M2 thread
Length
DO NOT OVER-TIGHTEN THE SCREWS!
The max torque for the different screw sizes are as follows:
M2 = 0,13 Nm
M2.5 = 0,26 Nm
M3 = 0,46 Nm
M4 = 1.1 Nm
TOOLS, THREAD LOCKING AND LUBRICATION
Tools Swecoin Part No.
Screwdriver Phillips No. 1 02542-001
Screwdriver Torx T9 02449-009
Screwdriver Flat blade 2 mm
Wrench 5 mm
Thread lock for screws that hold plastic parts 103650
Vaseline spray to lubricate moving parts 104237
Use Dexron II or III automatic transmission oil.