Swecoin TTP 101, Руководство по обслуживанию

Страница: 7 / 56

0102 TTP 101 Kiosk Printer Sub-system – Service Manual 7
2 PRODUCT PRESENTATION
There are two versions of the TTP 101 printer:
•
TTP 101 standard, for use with the Swecoin control board 00842-000 (SWC-842)
•
TTP 101 T, for use with customer specific control board
The TTP 101 printer offers fast, reliable and quiet printing, paper separation and
presentation of documents produced by public access terminals in a wide range of
applications.
The printer is a thermal printer with a patented presenter mechanism that does not
present the document until the printing is completed. The document length is software
selectable.
The following two illustrations show the printer exterior:
Paper release lever
Cutter module
Print module
Presenter module
Connector
board
SW96006A-R5
Light
shield
(on old
versions
only)
Hole for operation
of the cutting
mechanism by means
of a screwdriver
Connection
to paper-
feed switch
(on std model
only)
Figure 1. Front view of TTP 101 printer
The light shield fitted on older printers prevents light from passing through the document
presenter opening into the printer. The light could otherwise affect the operation of an
opto sensor mounted behind the opening.
An alternative way of connecting the paper-feed switch is through a printer control board
such as the one supplied by Swecoin. See Figure 3.