4.2 Tile Pin Allocation
The pin numbering scheme of the Tile is shown in
Figure 4
. The module pins allow soldering
onto a printed circuit board (PCB) using standard reflow soldering techniques. The pin function
assignment is given in
Tables 6
and
7
. Multiple supply grounds are provided and all supply and
supply grounds are required to be connected to the power supply in order to limit the current on
any one pin. Multiple signal grounds are provided to reduce cross-talk. Pins 13 and 14 are
intentionally left empty, and must be left unconnected.
Figure 4:
Tile pinout and pin numbers. Bottom view.
October 2020
Swarm Tile Manual - Rev 1.10
17/65
