666
77
6
Record / Stop
Microphone / LEDs
Lens
Mode Select
Micro SD card Slot
Reset Button
Power
Lanyard Clip
Lens:
The business-end of the camera, used to focus light on to the image sensor.
For best results, ensure the lens is clean and free from debris.
Mode Select:
Changes the recording mode of the camera.
Micro SD card Slot:
The slot for inserting the micro SD card which the
ThumbCam
records to. To insert a card, simply push it into the slot. To remove it, push it in
again, and it will ‘pop’ right out.
Reset Button:
Used to quickly return the
ThumbCam
to it’s initial booted state.
This is typically used only if the
ThumbCam
freezes and needs to be reset.
Lanyard Clip:
Used to attach the included lanyard. Alternately, it could be used
to attach the
ThumbCam
to just about anything - such as a key-chain or similar.
Power:
Press to turn the
ThumbCam
on and off. Do not turn off the
ThumbCam
whilst recording, or immediately after recording.
Record/Stop:
Starts and stops the
ThumbCam
recordings.
Microphone:
The device which records sound. If these holes are blocked, then the
range and quality of the audio recording will be significantly reduced.
LEDs:
Small colored lights which will indicate the current state and function of the
ThumbCam. There are two LEDs, one red and one blue. In bright light (such as
sunlight) these might be difficult to see.
Layout