INSTALLATION GUIDE
The Path To Enjoyment Starts Here…
If this device does not work when you first
plug it in, do not take it back to the store.
Contact the Swann Helpdesk using one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a
quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Business Security System
9 Channel Digital Video Recorder
With Motion Detection & Audio
*Please refer to the DMR’s instruction manual for more detailed information.
1. CHECK PACKAGE CONTENTS
2. INSTALL HDD
3. SITUATE AND CONNECT DMR
4. SYSTEM TIME SETUP
5. RECORD & PLAYBACK
Note:
Wireless Networks (WiFi) may interfere with and/or experience interference caused by the transmitter
in this unit. Changing the receiver to another channel/frequency or setting the Wireless Network (i.e. Wireless
Access Point) to a frequency further away from the camera’s set frequency can alleviate this problem.
Consult the documentation of your Wireless LAN device for information on how to change the transmission
frequency. These cameras work with most wireless camera receivers that support 2414MHz, 2432MHz,
2450MHz and 2468MHz.
1. Make sure your package contains:
Digital Multiplex Recorder (with HDD cartridge)
User User
Accessories
Power Adapter and
CordManualManual
2 Keys
2. Install HDD:
5
6
A (locked)
B (unlocked)
(1)Remove the Cartridge Casing from the DMR
(2)Remove the Cover from the Cartridge Casing
(3)Connect the HDD into the Cartridge Casing
(4)Slide the top Cover over the Cartridge Casing
(5)Reinsert the Cartridge Casing into the DMR
(6)Lock the Cabinet
