INSTALLATION GUIDE
What's In This Package?
If this device does not work when you first
plug it in, do not take it back to the store.
Contact the Swann Helpdesk using one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a
quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
DVR4000
4 Channel Digital Video Recorder
With Motion Detection & Audio
1.
Swann DVR PRO 4000 Digital Video Recorder with Hard Disk Drive (HDD) caddy
2.
Switching Power Adaptor and Power Cord
3.
Molex Power Connector and 4 x Screws for HDD caddy
4.
2 x Keys for HDD caddy Key/lock
5.
6 x BNC male to RCA female adaptors
6.
Pack of serial connection accessories
7.
User instruction Manual
8.
Quickstart guide (this document)
Index
Page
What’s in this package? ..................................
1
Introduction .................................................
2
Hard Disk Drive Installation ...........................
2
Hard Disk Drive Installation Steps ..................
3
Setting Time and Date ...................................
4
Configuring Motion Recording .......................
4
Manual Recording .........................................
5
Playing Back Recorded Video ........................
5
Searching for Recorded Video Events ............
6
Note:
Wireless Networks (WiFi) may interfere with and/or experience interference caused by the transmitter
in this unit. Changing the receiver to another channel/frequency or setting the Wireless Network (i.e. Wireless
Access Point) to a frequency further away from the camera’s set frequency can alleviate this problem.
Consult the documentation of your Wireless LAN device for information on how to change the transmission
frequency. These cameras work with most wireless camera receivers that support 2414MHz, 2432MHz,
2450MHz and 2468MHz.
1
2
3
4
6
5
7
