To take advantage of any unused channels on your receiver you can purchase additional Night
Hawk Extra Cameras, or a MicroCam IV Color Indoor Camera
(product code SW-P-MC4) can be used. The MicroCam IV Camera has similar DIP switches to
the Nighthawk Camera, which allow the use of any of the other available channels on your
receiver.
9v Battery Adaptor
Camera Power Adaptor (8V)
Night Hawk Camera with Stand
Night Hawk Camera with Stand When
mounted under eave or roof
Microphone in
power socket
!
Best Results are achieved where there is a clear “line of sight” between the Nighthawk
Camera transmitter and Receiver.
!
Try to avoid obstacles such as trees, walls, cars, trucks and buildings when maximum range is
required.
!
Interference from certain electronic equipment or the moving human body can also affect the
range obtainable.
!
Please test all devices before final installation because transmission quality can often be
improved by moving the components slightly.
!
Turn off the transmitter and receiver if the system is not in use.
!
Do not touch the antennas when the system is switched on.
!
Do not place the receiver behind a monitor or TV.
!
To avoid the risk of damage to Nighthawk Camera, use only the supplied power adaptors.
!
Don’t place above or near a heat source which may cause the equipment to overheat.
!
Microwave ovens can cause interference and diminish the quality of the signal if the
Nighthawk Camera or Receiver are located close by.
!
Beware of humid locations. Water droplets or spray may damage the units.
If condensation does occur, do not use until the equipment has dried out.
!
Never paint or attach metallic labels or stickers of any kind.
!
Do not use two Nighthawk Camera systems operating at the same time in the same area
using the same channel. This will result in picture interference. Switch one camera to one of
the unoccupied channels using the DIP switches.
!
Do not cut the DC power cable of the Nighthawk Camera to fit with another power source.
This may result in damage to the Nighthawk Camera & any unauthorised modifications will
void your warranty.
4
5
Camera Features
Important Information about your Night Hawk Camera
IMPORTANT: Due to the power consumption requirements of this product, we highly
recommend the use of a 9 volt battery only for short term portable use.
