Swann SR12010 Скачать руководство пользователя страница 8

8

Cleaning & Maintenance

DAILY CLEANING

The outside of your cooler can be cleaned using a soft cloth moistened with a mild detergent 
solution. Wipe dry with kitchen towel.

Do not use chemical or abrasive cleaners on any part of your cooler as these could permanently 
damage or discolour the surfaces.

DOOR SEALS

Ensure that the door seals are kept free from debris at all times. If they don’t seal properly this 
can waste energy. 

CLEANING INSIDE

From time to time it may be necessary to clean the inside of the cooler (eg after a spill)

1.  Switch off the cooler and remove plug from wall socket
2.  Remove drinks and shelves
3.  Clean the inside with a soft cloth moistened with a mild detergent soloution. Dry thoroughly 

with kitchen towel before replacing the shelves, drinks and switching the unit back on.

4.  Do not use abrasive or chemical cleaners on any part of the the cooler at any time.

CONDENSATION

Depending on the environment, you may notice a little condensation on the outside of the glass 
door. This is normal and can be wiped away with a dry cloth or piece of kitchen towel.
 

SR12010_IM.indd   8

17/02/2014   08:56

Содержание SR12010













Отзывы: