7
Reversing the door
8
1
5
6
6
1
5
8
This cooler has the capability of either opening the door from the left or right side. The unit
is delivered to you with the door opening from the left side. Should you desire to reverse the
opening direction, please follow these instructions.
NOTE: All parts removed must be saved should you with to restore the door to original orien-
tation.
1. Remove the two screws(1) that hold the upper hinge (5)(right side) to the frame.Take
away the upper hinge (5).
2. Lift the door and place it on a padded surface to prevent scratching it. (8)
3. Remove the two screws (6 )that hold the lower hinge (2) and Make sure to Remove the
lower hinge (2).
4. Remove the left front leg (4) and transfer it to the right side.
5. Before placing this lower hinge (2),remove the bolt-pin (5) and reverse the direction of
the lower hinge (2).Then install the lower hinge (2)onto the left side of the lower frame
with two screws (6).
6. Insert the bolt-pin (5)to the lower hinge (2).
7. Set the door to its place making sure the door seat at the lower hinge (2).
8. While holding the door in the closed position secure the upper hinge (5) in the top frame
of left side with two screws (1). Please note: do not tighten the two screws (1)until the
top of the door is leveled with the counter top.
SR12010_IM.indd 7
17/02/2014 08:56
