4
Connection Guide
Top, from left to right:
DC 12V Input
and
Network Video Port
(Video Out).
Required Connections
Network Port (Video Out):
The main connection for the camera. This connects using
the included CAT5E cable to one of the Network Video Inputs on the rear of the NVR
(see your NVR manual for additional details). This is the only required connection
when connecting the camera to a Swann PoE NVR.
We do not recommend or support the use of any cables other than those
supplied with your camera/NVR, nor modifying the supplied cables.
Optional: Advanced Users Only
DC 12V Input:
The camera is intended to be powered via PoE
(Power over Ethernet).
This means you will
not
have to connect this port when the camera is directly
connected to a
Swann
NVR supporting PoE (such as the
NVR-7200
series).
If you are connecting the camera to your NVR via additional network hardware such
as switches and routers that do not support PoE then you can power the camera
using this DC 12V input.
Note that using this method will require advanced networking knowledge to set up
the camera successfully on your NVR.
DC 12V IN
