14 | SmithsEP.co.uk | Issue 002 - November 2022
Issue 002 - November 2022 | SmithsEP.co.uk | 15
SOLANO RANGE
•
•
•
SOLANO RANGE
Panel Intelligent controls actuators/valves and automatically regulates fans’ speed depending on the required room tempera-
ture. Fans speed changes automatically for lower rate, when temperature in a room gets closer to desired one.
Additional functions – weekly thermostat, availability of BMS communication signals
Possibility to connect outside temperature sensor NTC, supplied with cable lenght 5 m, max cable length 20 m.
▪
▪
▪
MULTI 6 Splitter allows to connect and control more fan heaters (up to 6/12 pcs.) and valves with actuators (up to 6/12 pcs.).
Control of fans and valves is done using COMFORT or INTELLIGENT panel.
To connect more than 6 fans and valves, it is possible to connect Splitter MULTI 6 with each other (maximum extension of up to
10 MULTI 6 splitters). In such case, in the first Splitter MULTI 6 there should be connector DS-N left open, in other Splitters
MULTI 6 (2..10) connector DS-N must be closed.
13.
Electrical connection diagrams
13.1. Connecting Solano units with no automatic control
* The unit set does not consist of: a master switch, a fuse, a feeding cable
SOLANO RANGE
•
•
•
Fan wiring description
U1
high
speed – brown
U2
middle
speed – grey
U3
low
speed – red
N neutral – blue
PE protection - yellow/green
13.2. Connecting severalSolano units with COMFORT panel, valves and actuators
One COMFORT panel may regulate up to:
• 3 pcs of Solano Eco 1, 2 or 3
• 2 pcs of Solano MAX
* The unit set does not consist of: a master switch, a fuse, a feeding cable
HEAT
- thermostat sends signal for valve/actuator and fan, fan turns off when temperature in room is achieved, valve/actuator closes
water supply.
FAN
- function not active, unit will not operate when FAN switch is selected
COOL
- thermostat sends signal only to fan and the servo of the valve, fan begins operation starting from temperature which is set on
thermostat (function used to air mixer Solano MIX or for room ventilation in summer season)
Attention! You can use additional jumper on the contacts 4-5 of COMFORT Panel, in this case you may only use function of changing
speed of fan I-II-III and ON/OFF. The thermostat and switches HEAT/FAN/COOL remain not active.
Additional jumper on terminals 4-5 might be applied when for ex different (supplied by user) thermostat is used to control the system.
In that case:
- motor would be working on set speed
- thermostat open/close the servo of the valve depending on set temperature
13.3. Connecting Solano units with panel INTELLIGENT.
Panel Intelligent controls actuators/valves and automatically regulates fans’ speed depending on the required room temperature.
Fans speed changes automatically for lower rate, when temperature in a room gets closer to desired one.
Additional functions - weekly thermostat, availability of BMS communication signals
Possibility to connect outside temperature sensor NTC, supplied with cable lenght 5 m, max cable length 20 m.
One INTELLIGENT panel may regulate:
• up to 2 pcs of Solano Eco.
• For Solano Eco MAX only 1 pcs
* The unit set does not consist of: a master switch, a fuse, a feeding cable
SOLANO RANGE
Panel Intelligent controls actuators/valves and automatically regulates fans’ speed depending on the required room tempera-
ture. Fans speed changes automatically for lower rate, when temperature in a room gets closer to desired one.
Additional functions – weekly thermostat, availability of BMS communication signals
Possibility to connect outside temperature sensor NTC, supplied with cable lenght 5 m, max cable length 20 m.
▪
▪
▪
MULTI 6 Splitter allows to connect and control more fan heaters (up to 6/12 pcs.) and valves with actuators (up to 6/12 pcs.).
Control of fans and valves is done using COMFORT or INTELLIGENT panel.
To connect more than 6 fans and valves, it is possible to connect Splitter MULTI 6 with each other (maximum extension of up to
10 MULTI 6 splitters). In such case, in the first Splitter MULTI 6 there should be connector DS-N left open, in other Splitters
MULTI 6 (2..10) connector DS-N must be closed.
Fan wiring description
U1 high speed
–
brown
U2 middle speed
–
grey
U3 low speed
–
red
N neutral
–
blue
PE protection - yellow/green
13.4. Splitter MULTI 6 - control up to 6 pieces of Solano Eco/Solano Eco MAX from one COMFORT or INTELLIGENT Panel
MULTI 6 Splitter allows to connect and control more fan heaters (up to 6 pcs.) and valves with actuators (up to 6 pcs.). Control of fans
and valves is done using COMFORT or INTELLIGENT panel.
To connect more than 6 fans and valves, it is possible to connect Splitter MULTI 6 with each other (maximum extension of up to 10
MULTI 6 splitters). In such case, in the first Splitter MULTI 6 there should be connector DS-N left open, in other Splitters MULTI 6 (2..10)
connector DS-N must be closed.
