Swann AMU Rescon, Руководство оператора

Страница: 47 / 72

AMU Rescon
Program Overview
A-96.250.351 / 230320
45
8.5. Installation (Main Menu 5)
Sensors Flow * Menu numbers
5.1* 5.1.1*
Meas. Mode
5.1.2*
USP Operating Mode
5.1.3
Sensor Parameters Cell Constant
5.1.4 Temp. Corr.
Cable length
Temp. Compensation Comp. 5.1.5.1
5.1.5*
Signal Outputs Signal Output 1 and 2 Parameter 5.2.1.1 - 5.2.2.1*
5.2* 5.2.1* and 5.2.2* Current Loop 5.2.1.2 - 5.2.2.2*
Function 5.2.1.3 - 5.2.2.3*
Scaling Range Low 5.2.x.40.10/10*
5.2.x.40 Range High 5.2.x.40.20/20*
Relay Contacts Alarm Relay Alarm Alarm High 5.3.1.1.1*
5.3* 5.3.1* 5.3.1.1* Alarm Low 5.3.1.1.26
Hysteresis 5.3.1.1.36
Delay 5.3.1.1.46
Sample Flow Flow Alarm 5.3.1.2.1
5.3.1.2* Alarm High 5.3.1.2.2*
Alarm Low 5.3.1.2.36*
Sample Temp. Alarm High 5.3.1.3.1*
5.3.1.3* Alarm Low 5.3.1.3.26*
Case Temp. high 5.3.1.4*
Case Temp. low 5.3.1.5*
Relay 1 and 2 Function 5.3.2.1–5.3.3.1*
5.3.2* - 5.3.3* Parameter 5.3.2.20–5.3.3.20*
Setpoint 5.3.2.300–5.3.3.301*
Hysteresis 5.3.2.400–5.3.3.401*
Delay 5.3.2.50–5.3.3.50*