54
A-96.250.321 / 191015
AMI Solicon4
Program List and Explanations
2.2.2
Miscellaneous
:
2.2.2.1
Case Temp:
Shows the current temperature in °C inside the trans-
mitter.
2.3 Sample
2.3.1
Sample ID
:
Shows the identification assigned to a sample. This
identification is defined by the user to identify the location of the
sample.
Temperature
: Shows the current sample temperature in °C.
(Pt 1000)
: Shows the current sample temperature in Ohm.
Sample Flow
: If Q-Flow is chosen
Shows the current sample flow in l/h
Raw Value:
shows the sample flow in Hz.
Sample Flow
: If deltaT is chosen
Shows the current sample flow in l/h
deltaT 1
: Temperature measured at sample inlet of the
deltaT sensor
deltaT 2
: Temperature measured at sample outlet of the
deltaT sensor
2.4 I/O State
Shows current status of all in- and outputs.
2.4.1/2.4.2
2.5 Interface
Only available if optional interface is installed.
Review programmed communication settings.
Alarm Relay:
Inactive or active
Relay 1 and 2:
Inactive or active
Input:
Open or closed
Signal Output 1 and 2:
Actual current in mA
Signal Output 3 (option):
Actual current in mA
