16
SPARES
www.eureka-swan.co.uk
1
2
3
4
1. SC15834N-01 3-in-1 tool
2. SC15834N-02 2 Metre Hose
3. SC15834N-03 Brush roll
4. SC15834N-04 Pet tool
5. SC15834N-05 Cover filter
6. SC15843N-06 Foam filter
- Cleaning Exhaust Filter
LOCK
1
2
3
filter cover
filter
Remove filter cover with filter. Wipe with
cloth over rubbish bin, removing dirt and
debris.
Wash with water every 3 months,
allow at least 24 hours to dry and
make sure it is dry thoroughly before
re-using
Locate and unlock filter cover as shown.
Push left to un-lock, right to lock
WARNING:
Turn off and unplug vacuum cleaner before performing
maintenance to the vacuum cleaner.
DUST TANK
1. Remove the dust
tank.
2. Push the release
button, open the dust
tank and clean all
parts of the dust tank
3. Open the dust tank
filter lid located on top
of the tank
4. Remove the dust
tank foam filter.
CLEANING BRUSH ROLL
Carefully remove any string, hair or debris located on the
brush roll.
You can use a tool such as a small knife or scissors to
remove and cut any hair or string.
- Cleaning Exhaust Filter
WARNING:
Turn off and unplug vacuum cleaner before performing
maintenance to the vacuum cleaner.
Do not turn the appliance on when the dust tank is removed. In order to keep the suction
force optimised, the dust tank and filters must be cleaned regularly.
CAUTION:
- Cleaning Dust Cup Filter
5. Hand wash the
foam filter..
6. Allow filter to dry
before putting back
info vacuum cleaner
7. Twist filter assem-
bly anti-clockwise to
remove for cleaning
dirt and debris as
needed.
DO NOT
operate without filter installed
DO NOT
wash dust tank in the dish washer
DO NOT
install filter if it is damp
SC15830_32_34_IM.indd 16
14/01/2019 11:16
