Connecting your Camera
4
5
Installing a Camera
+
-
Connect the Video and Power
wires you passed through the seal
plug to your camera. Connect
the opposite end of the cables to
a video viewing device and
check for correct operation.
Insert the cables for
the Camera Power,
Camera Video and
Heater / Blower
through the seal plug
on the underside of
the back end of the
1060 housing and
pass the cables
through in to the
housing. Once this is
done tighten the nuts
on the seal to
prevent moisture and
dust entering.
Fit your CCTV camera to the
camera mounting plate
using the supplied mounting
screw or the screws that may
have come with your
camera
Fit the camera mounting plate back into the mounting rails
at the bottom of the housing and push down firmly until it
clicks into place. Make any necessary adjustments to the
distance from the glass or angle of the camera then screw
in the supplied mounting screws to stop the mounting
plate from moving.
