swamp LM-50, Руководство пользователя

Страница: 2 / 10

higher than this.
9.Don’t connect the device to any dimmer pack.
10.First run, there will be smoke or smells, and all disappearing a few minutes later.
11.Make sure there are no flammable materials close to the unit while operating, as it is
fire hazard. Look over power wires carefully, replace immediately if there is any damage.
12.Never run on for a long time lest shortening lifespan.
13.Avoid any inflammable liquids, water or metal objects entering the unit. Once it happen,
cut off the mains power immediately.
14.Do not operate in dirty and dusty environment, also cleaning fixtures regularly.
15.Do not allow children to operate the fixture.
16.Do not touch any wire during operation as there might be a hazard of electric shock.
17.Avoid power wires together around other cables.
18.Disconnect mains power before fuse/lamp replacement or servicing.
19.Replace fuse only with the same type.
20.In the event of serious operating problem, stop using the unit immediately.
21.Never turn on and off the unit time after time.
22.The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
23.Do not open the unit as there are no user serviceable parts inside.
24.Never try to repair the unit by yourself
，
repairs carried out by unskilled people can lead
to damage or malfunction. please contact the nearest authorized technical assistance
center.
25.Disconnect the mains power if the fixture is not used for a long time.
26.Do use original packing materials once transport it again.
27.Do not look directly at the LED light beam while the fixture is on.
For power supply, do not connect in series much more than 7 units, use another mains
supply for next 7 units.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit
is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a weight of 10
times of the unit’s weight. Also always use a safety cable that can hold 12 times of the
weight
of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out
of the touch of people and has no one pass by or under it.
Technical Specifications
Voltage:AC95-245V,50/60Hz
Power consumption: 80W
LED QTY: 50W Lumen LED
Function: DMX512,Sound active,Automatic,Master/Slave
Beam Angel:12°