3
MS-13-PTI-PM-E
Rev 0 6-04-WEL
For proper and safe operation, the measuring device must be installed, operated, and serviced
according to NEC, local regulations, and these instructions. Otherwise, personal injuries or damage
or both can occur.
Only qualified persons should work on these devices.
1. Use within the conditions specified in the Swagelok General Industrial Transducer catalog.
2. Always disconnect the device from its power supply before opening it. Do not touch any of the
device’s contacts after installing.
3. The shield / ground connection must be wired to ground to protect the instrument from
electromagnetic disturbances.
4. If the device is visibly damaged or has been stored under inappropriate conditions,
turn off the device and do not use again.
1. Safety Regulations