SW-Stahl 410110L, Инструкция по эксплуатации

Страница: 6 / 14

6
D E S C R I P T I O N
•
32-piece
•
For the non-destructive and professional removal and installation of self-adjusting
couplings with 3- or 4-hole pitch
•
Without this tool set, correct assembly and disassembly is almost impossible!
•
Fits all standard vehicles. Audi, VW, BMW, Mercedes Benz, Volvo, Opel, Renault, etc.
S A F E T Y I N S T R U C T I O N S
During clutches’ mounting operation, it is necessary to give special attention. A wrong installation
can cause clutch bell deformations or a loss of regulation. To avoid this situation and to grant a right
assembling and disassembling of these SAC clutches, it is necessary to use a special tool. SAC-coupling
can be recognized by their 2 or 3 yellow buckles
A P P L I C AT I O N
These clutches are defined self- adjusting, because due to a self-adjusting device, they balance the
clearance caused to the wearout of the disk clutches and the pedals do not become hard.
This grants a long life and an increasingly comfort.
D I S M O U N T I N G
Follow these instructions:
•
Mount the handle into the main threaded shaft. (Reference 1)
•
Unscrew the 3 screws at 120° or 4 screws at 90°. (Reference 2)
•
Mount the suitable screws M6 or M7 or M8 (legs) supplied in this set. (Reference 3 and 4)
•
Install the special clamp tool (3 or 4 shanks) and lock it with the M8 locking knobs.
•
Rotate the special tool’s handle to compress the cup spring totally. (Reference 5)
•
Unscrew now the remaining flywheel locking screws. (Reference 6)
•
Remove the M8 locking knobs from the special tool, then the special tool and the three legs.
•
Now the pressure plate is raised and the clutch bell touches the flywheel, becoming
easy to unscrew and remove the clutch. (Reference 7)