SW-Stahl GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Straße 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: [email protected]
S3531
www.swstahl.de
BED
IENUN
GS
AN
LEI
TUNG
General
This stethoscope allows you to locate noise fast and easy. Due to the six provided probe
heads and the six-way amplifier, you can operate this stethoscope while driving and at
six different testing spots at the same time. The six switchable testing channels allow a
precise localization of noise sources. The one-way amplifier, used with or without a
tracer pin, allows a fast and convenient diagnosis.
Included
6x probe heads with alligator clips
1x six-way amplifier with channel switch and volume control
1x one-way amplifier with volume control
1x tracer pin
1x padded headphones
2x 9V batteries
Maintenance
Clean this device with a soft and dry cloth, only. You will find instructions how to replace
batteries further down below. Do not use strong cleansers or solvents for cleaning
Safety advice
Be careful when testing on running engines: loose clothing, tools, accessories can be
caught up in revolving parts of the engine and might lead to serious personal injury or
property damage.
Be careful when testing on hot engines: risk of burning.
Attach wires and probe heads in such a manner that they will not be caught up by
revolving parts of the engine.
Carelessness leads to severe personal injury or property damage. That’s why you
should always have a second person to do the testing while the first one is driving
the vehicle. The driver is never allowed to do the testing while driving.
Be careful when mounting probe heads next to electrical connections or the car’s
battery. The alligator clips are made from a conductive material which might cause
short circuits and/or cable fire.
After mounting the probe heads, all wires have to be stripped through the engine bay
and opened windows of the passenger seat. This way you avoid any risk of
endangering other traffic participants.
Do not test drive on a highly frequented road.
