14
3.1.1 HDD
Please install a 2.5" SATA or SSD drive on the detachable hard disk tray which is provided with the
DVR. The hard disk installation steps are as follows
：
1. Pull the HDD cover out and put into a HDD.
。
2. Push HDD into bottom and until it locks.
3. Locked the HDD and cover by particular key.
3.1.2 Power
When MDVR has connected HDD and Network disabled then energy consumption was 7.8W.
When the network of DV3604 always disable, then energy consumption was 4.8W.
We recomment user that connect the MDVR connection to +9 V ~ 36VDC power supply ( see
below )
。
Note:
If system
enable
that keep record when engine switch off.
( Defaults )
--
>> Red line connect “ACC+”, Yellow line connect “Battery”.
But differently (
disable
):
-->> Combine Red
、
Yellow Line and connect “ACC+” .
