28
4.6.8.1 PTZ
The MDVR passes through RS-485 to connect to the PTZ camera. Currently it supports PELCO-P /
PELCO-D protocol setting, and can set the transmission signal per second transfer rate.
Swapping video channel with camera to full screen,then press PTZ putton on remote controller.
At this moment system would show PTZ camera icon on the left of video number.
That mean system stays in PTZ mode, which can control it.
System can control the PTZ Viewing direction via
a remote controller‘s direction button.
To press
ENTER
that can show settings UI of origin location.
