SVS-Vistek ECO Series, Руководство пользователя

Страница: 35 / 104

SVS-VISTEK
Feature description 35
Use multiples of 15 ns to write durations into camera
memory
6.2.3 Temperature Sensor
A temperature sensor is installed on the mainboard of the camera.
To avoid overheating, the temperature is constantly monitored and read.
Besides software monitoring, the camera indicates high temperature by a
red flashing LED. (See flashing LED codes)
6.2.4 Read-Out-Control
Read-Out-Control defines a delay between exposure and data transfer.
Read-Out-Control is used to program a delay value (time) for the readout
from the sensor.
With more than one camera connected to a single computer, image
acquisition and rendering can cause conflicts for data transfer, on CPU or
bus-system.
Figure 22: Illustration of physical data stream in time
6.2.5 LookUp Table
The LookUp Table Feature (LUT) lets the user define certain values to
every bit value that comes from the ADC.
To visualize a LUT a curve diagram can be used, similar to the diagrams
used in photo editing software.
The shown custom curve indicates a contrast increase by applying an S-
shaped curve. The maximum resolution is shifted to the mid-range.
Contrasts in this illumination range is increased while black values will be
interpreted more black and more of the bright pixels will be displayed as
100 % white...
For further Information about curves and their impact on the image refer
to our homepage:
Knowledge Base – LUT