SVP UDT-4K, Руководство пользователя

Страница: 173 / 193

UDT-4K UHD HEVC Digital Camera Transmitter
MANUAL V0
173
A.3 Quick User Guide
The new Power Amplifiers allow the user to control automatically the power
that these devices provide.
When the POWER DC LED lights in Green on the amplifier, indicates that the
PA is activated from the transmitter. To activate the amplifier, the RF button
on the transmitter must be ON.
If the power supply is not correct, the POWER DC LED on the amplifier blinks.
The different alarms are explained in section A.3.2 Alarms.
ALARM LED shows the status of the device. If there is any alarm, the LED will
indicate which alarm is present by lighting up RED in different sequences for
each alarm (blinking in different time intervals). All the alarms are explained
in section A.3.2. Alarms.
The equipment is fed with DC power supply from 9 to 36V. It is powered
through DC power supply connector. Furthermore, for a long operating
temperature range, the fans start running at 50ºC.
A.3.1 PA Configuration
The following menu screen and figures show the different steps that must be
followed when the connection between the UDT-4K transmitter and the PA
amplifier is established.
First, connect the two equipment as it is shown below:
Figure A.6: Connection between the UDT-4K and the PA
The RF ON button must be pressed to allow the communication
between the UDT-4K transmitter and the PA amplifier.