SVP UDT-02 Скачать руководство пользователя страница 53

Страница: 53 / 165

UDT-02 UHD HEVC Digital Camera Transmitter
MANUAL V1.0

4.6.1.17

Encoder Output

The encoder output option allows the configuration of the transport stream

bitrate. When you use the transmitter’s ASI output, the output bitrate can be

set manually on this screen. When the RF is enabled, the modulator starts

working and the output bitrate is set by the modulation parameters, changing

automatically to Auto mode.

Figure 4.20: Encoder Output Menu

Line nº

Function

Bit Rate (eligible parameter):
In this field, the output bitrate is shown. When it is wanted to select

between an automatic bitrate or configure manually the bitrate,

press Right, Left buttons. If manual configuration is selected then,

press OK button to select the desired bitrate with the UP, Down keys.

Press the OK button to save the introduced value.
The available options are:

•

Auto

•

Manual (editable parameter)

Figure 4.21: Encoder Output menu options

If the user selects the manual option, the first and second lines disappear

on the main screen.

When the encoder output is in Manual, if you activate the RF, the encoder

output changes to AUTO mode automatically.

Содержание UDT-02






































































































































































Результаты поиска

Содержание UDT-02

Отзывы:

SVP UDT-02, Руководство пользователя, Страница: 53 / 165

Результаты поиска

Содержание UDT-02

Отзывы: