SVP UDT-02 Скачать руководство пользователя страница 164

Страница: 164 / 165

UDT-02 UHD HEVC Digital Camera Transmitter
MANUAL V1.0

164

Final note

SVP Broadcast Microwave S.L. is constantly striving to improve all of its

products.
Therefore, we ask you to understand that modifications may occur in designs,

equipment and technology. Consequently, we do not accept responsibility for

any variations of information, illustrations or descriptions contained in this

manual.
The texts, illustrations and instructions in the manual are based on the

existing situation when the manual is published.
Reprinting, reproduction and translation, in part or in whole, is

forbidden without written authorisation from SVP Broadcast

Microwave S.L.
SVP Broadcast Microwave reserves all rights regarding intellectual property

rights.
All rights reserved regarding modifications.

Содержание UDT-02






































































































































































Результаты поиска

Содержание UDT-02

Отзывы:

SVP UDT-02, Руководство пользователя, Страница: 164 / 165

Результаты поиска

Содержание UDT-02

Отзывы: