SVP UDR-104, Руководство пользователя

Страница: 44 / 232

UDR-108 Diversity Receiver
MANUAL V0
44
4
ISDB-T

Tuner:
This option allows enabling or disabling each of the IF inputs of
the device. When the enable option is selected in an IF input,
this input supplies power to the down converter connected to
it. To choose the IF input, press the Right, Left buttons. To
enable or disable the selected input, press the OK button.
(eligible parameter)
The available options are:
•
Tuner 1 (Enable, Disable)
• Tuner 2 (Enable, Disable)
•
Tuner 3 (Enable, Disable)
•
Tuner 4 (Enable, Disable)
• Tuner 5 (Enable, Disable)
•
Tuner 6 (Enable, Disable)
• Tuner 7 (Enable, Disable)
•
Tuner 8 (Enable, Disable)
5
ISDB-T

IF Cable:
In this field, the type and the length of the cable used between
the input and the down-converter must be specified. To select
the type of the cable, first press the OK button. Then, to choose
the type of cable press the Up, Down arrow buttons. Once the
type of cable has been selected, press the OK button again to
move to the length option. Then, with the Up, Down, Right and
Left buttons the length can be selected. To save the introduced
value, press the OK button, the maximum length available is
150 meters. (the type of cable is an eligible parameter and the
length of the cable is an editable parameter)
The available options are:
• BELD PRG11
•
BELD H125
• LDF450A 1/2
•
CEFLEX 1/2
•
RG-223
• RG-58
•
RG-214
•
LMR-400
6
ISDB-T

Demod Monitor:
In this field, the number of the IF input (from 1 to 8) which you
want to be monitored must be selected. Once it has been
selected, OK button must be pressed to access the monitor
screen where the parameters of the received signal are
displayed. (reading parameters)
Table 4.4: ISDB-T Input Select menu options
Next, is shown the layout of the monitor parameters (Level of the received
signal, Signal to Noise Ratio, Constellation, FEC, Time Guard, Mod, Spectrum
and Rotation).