SVP UDR-104, Руководство пользователя

Страница: 108 / 232

UDR-108 Diversity Receiver
MANUAL V0
108
• The Local GPS Receiver and Compass can be connected to the LOCAL
GPS & COMPASS DB-9 connector or to the AUTOTRACKING Bayonet 19
pins connector on the Receiver’s rear panel. But not to both at the
same time.
• The GPS Receiver and Compass must be installed in the base of the
Van or Boat in line with the QPT Positioner Cable connector.
Once we have made sure that the installation is correct, we can start with the
configuration of the Parabolic Antenna Autotracking system.
Next, how to configure the Autotracking with a Parabolic Antenna is
explained.
First, go to Autotracking option.
Figure 5.6: Parabolic Antenna Autotracking menu
In this option, there are three possible types of Autotracking
(Parabolic, Multisector AMS and Omnidirectional). In this case, select
the Parabolic option with the Right and Left keys. Once the option is
selected, press the OK button to enter the configuration menu.
Once the user is inside the Parabolic Antenna option, there are three
possible options (Auto, Manual and Fold) which are detailed below:

AUTO MODE
Figure 5.7: Auto Menu
When the Auto option is selected, it means that the Parabolic Antenna
is aimed automatically at the Transmitter device through the GPS
coordinates of the Transmitter and the Receiver device.
Please note that, if for 30 seconds there is no GPS signal, the device
will start looking for GPS signal. If there is no GPS signal but there is
RF signal, then, the tracking will start looking for maximum RF signal
received.
For a correct operation of the Auto mode, the Receiver Position must
be set, and Receiver Configuration menu must be configured.
To start configuration please press OK on Auto mode.