35
English
www.sveon.com
SDT10100 - User Guide
9.3 Password
This menu allows you to set a password to the menu, locked TV channels and censored TV programs.
Note: The default password is 0000.
• Locking of Setup menu: Enables/Disables Setup menu with a password.
• Locking of channels: If this option is enabled, each time you select a locked channel a password will be required
to watch it.
• Locking censored: This option stablishes the age at which a password is needed to watch a TV channel.
• Without lock: A password is not needed to watch the channel.
• Total lock: A password is always required to watch a TV channel.
• 02-18: A password is needed if the age clasification of the channel is higher than the selected values.
Note: The information about the program´s clasification is provided by the TV channel.
• Change the password: Press the arrow buttons <left/right> to change the password and use the numeric buttons
<0-9> to enter the old password and the new password (two times to confirm). When you enter the correct pass-
word a message appears to confirm that the password has been successfully changed.
9.4 Schedule recording and direct recording
SDT10100 allows you to create recording tasks manually, record through Electronic Program Guide (TV or Radio)
or by pressing directly the “Rec” button of the remote control.
• Set recording tasks manually
If you want to set a recording task manually press the
yellow button of the remote control and then press the
red button to select between all the available options (10
options)
A window will appear with the type of recording,
“TV/Radio”, the TV channel info, the start time, the finish
time and the frecuency with wich you want to record.
When the time and date of the recording arrives, the de-
vice changes the TV channel and starts the recording
task. If you want to modify a recording task, select it and
press the red button of the remote control.
Note: To make sure the recording task is going to be
started successfully, set recording tasks with at least
three minutes between them.
If you wanto to delete a recording task, select it and
press the green button of the remote control. Then select
“OK” to confirm or “Exit” to cancel.
Note: You can delete recording tasks if they are not run-
ning. If you want to delete a recording task which is run-
ning, you have to Stop it before deleting it.
