ENG
3
User Manual
SVEN 180
SVEN 185
2. PACKAGE CONTENTS
•
Speakers — 2 pcs
•
Operation manual — 1 pc
•
Warranty card — 1 pc
3. SAFETY PRECAUTIONS
•
Do not open the MSS and do not perform repairs by yourself. Service and repairs
should be performed only by qualified specialists at authorized service centers. The list of
authorized service centers is on
www.sven.fi
•
Do not allow the circuit of wires (including the grounded ones) between the speakers,
on the power amplifier or the ground, for it causes damage to the power amplifier output
stage.
•
Make sure that foreign objects do not get inside the holes of the MSS.
•
Protect the MSS from high humidity, water and dust.
•
Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not
expose it to direct sunlight.
•
Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
•
If the MSS does not operate, unplug it and address your dealer.
4. TECHNICAL DESCRIPTION
Sven 180, Sven 185 USB Multimedia Speaker Systems 2.0 (MSS) are designed to play music
and sound games, movies etc. MSS has built-in bridge amplifier, acoustic and signal cable
due to which it can be connected to virtually any audio source TV, PC, etc. MSS is connected
to power supply via USB-port of a PC, laptop or 5V DC power supply with a cable USB.
MSS special features
•
Power supply via USB-port of a PC, laptop or 5V DC power supply
•
Volume control on the cable
•
Audio sources stereo audio input
•
Plastic speakers cabinets
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away.
•
Place MSS far away from monitors and TV sets, as insignificant image distortion in these
super-sensitive devices is possible.
MSS Connecting
•
Before connecting, make sure that MSS is unplugged. Connect signal cable mini-jack 3,5 mm
built-in speaker to audio output of the sound source, for example computer, as shown in
the diagram below.
•
Connect USB-connector to USB-port of PC (laptop or 5V DC power supply) via built-in
USB-cable.
•
Set volume level to minimum by turning VOLUME +/- control wheel on the cable
counterclockwise until it stops.
•
Turn on PC power supply, turn on audio source.
•
Adjust volume level by turning /- control wheel.
Notes:
•
After finishing operation with MSS, mind to turn off the USB-cable from the PC, laptop
USB port or 5V DC power supply.
