Sven SB-2160A, Руководство по эксплуатации

Страница: 20 / 23

ENG
20
Soundbar with Wireless
Subwoofer
•
To connect the speakers to a PC, TV, mobile devices, etc., use the mini-jack signal cables to
the mini-jack (included).
•
To connect speakers to PC and TV use optical cable (included).
•
Connect the subwoofer power cable to the mains oulet.
•
Connect the power adapter to the mains oulet. The power LED on the front control panel will
light up. Then switch on the subwoofer with the POWER switch (ON position) on the subwoofer
rear panel.
•
To switch on the soundbar, press button
a
on the control panel or button
a
on the remote
control. To switch the soundbar off, press the Standby mode button again (on the soundbar,
long pressing).
•
At the first turn on, the soundbar and subwoofer will automatically establish a connection
between themselves. As soon as the connection is installed, the LED on the rear panel of the
subwoofers will change the light from intermittent to permanent.
•
Select the signal source.
•
Adjust the master volume with the
d
and
h
buttons on the RC.
•
After using the MSS, mind to switch it off using button
a
on the RC, switch off the subwoofer
using the POWER switch (OFF position) on the subwoofer rear panel and unplug the power
adapter from the socket.
Player mode
•
When the product is on, the system will automatically switch to the Player mode if you install USB
flash in the slot
j
or use the
a
button on the top panel or the
b
button on the remote control.
The selected mode is displayed on the LED-display. Playback starts automatically.
Fig. 4. Connection diagram