Sven SB-2160A, Руководство по эксплуатации

Страница: 19 / 23

ENG
19
SB-2160A Operation Manual
Remote control
a
: POWER button
b
MODE: switch mode button
c
: Mute (short pressing);
Return to default settings (long pressing)
d
: Volume increase button
e
: Previous track in Player and Bluetooth mode;
Rewind (long pressing in Player mode)
f
: Play/Pause in Player and Bluetooth mode/
Disconnect from device (long pressing in Bluetooth mode)
g
: Next track in Player and Bluetooth mode;
Rewind (long pressing in Player mode)
h
: Volume decrease button
i
TREBLE-/+: HF volume control
j
BASS-/+: bass level up/down
k
3D: equalizer mode switch (short pressing);
Off/on 3D mode (long pressing)
BATTERY INSTALLATION
•
Open the battery compartment on the back of the remote
control.
•
Insert the included AAA batteries (included, observing polarity).
•
Close the battery compartment.
Notes. Use the RC at an angle no more than 30° at a distance
of no more than 7 meters. Direct the remote control to the
infrared receiver on the subwoofer. If the remote control does
not operate, check the batteries or replace the discharged
batteries with new ones. Remove the batteries from the RC if
you don’t intend to use it for a long time (more than one week).
5. PREPARATION AND OPERATION
Installation of the system
•
The soundbar is delivered in assembled form. A wireless subwoofer emits a non-directional
sound, so it can be placed anywhere in the room in which the subwoofer will sound best. Installation
completed.
Note: The existing mount on the body allows you to hang the soundbar on the wall under
the TV.
MSS сonnecting and control
SB-2160A soundbar with a wireless subwoofer can be connected to virtually any audio source:
DVD/CD player, TV, PC, laptop, etc. (see connection diagram in Fig. 4).
•
Connect the power cable with the power adapter (included). Then connect it to the the DC IN
e
jack of the soundbar (see Fig. 4).
Fig. 3. Remote control