Sven SB-2150A, Руководство пользователя

Страница: 7 / 26

ENG
7
SB-2150A
Operation Manual
Player mode
• The system will automatically switch to the Player mode if you install USB flash in the slot f
or use the a button on the top panel or the p button on the remote control. The selected
mode is displayed on the LED-display. Playback starts automatically.
Bluetooth mode
• To transmit a signal in this mode, at first connect the device to the signal source (see Fig. 6).
To do this, select the Bluetooth mode using the b button on the top of the soundbar or the k
button on the remote control. The MSS switches to the search mode, the display a displays “BT”.
• It is necessary to select the search mode of devices with Bluetooth on a signal source (tele -
phone, notebook, smartphone, etc.). “SVEN SB-2150A” massage will be displayed on the screen
which is to be connected to*.
• If the connection is successful, the “BT” indicator has a steady glow. If the connection fails,
the “BT” indicator is intermittent. It is necessary to re-translate the system into the search mode
(turn it off and on again) **.
Note. When watching streaming video, the audio track may lag behind the image. This
is not a malfunction, but is due to the technical capabilities of the source and receiver Blue -
tooth chips. To eliminate this desynchronization, it is recommended to use an HDMI (ARC)
connection, an optical or signal cable with an audio source.
Wireless connection between Soundbar and Subwoofer
Note. When get the sets of Sound Bar, User only needs to finish the first pairing connection be -
tween Sound Bar and Subwoofer. After then every time to restart the soundbar it will reconnect
automatically in whatever mode.
• Power on the Soundbar and subwoofer, the light on subwoofer will flashing continuously,
and switch the Soundbar to BT mode. Pay attention to: At this stage, do not connect any devices
(such as mobile phone, tablet) to the soundbar.
• Holding the Play/Pause button g more than 3 seconds, the display will showed “PAIR”, after
connected successfully, soundbar will have voice prompts “DU”, and the subwoofer keeping
light. The first connection should take about 10 seconds.
Note. Due to the constant development of the software, the actual MSS operation may dif-
fer from that described in this manual. The most recent version of the manual is available
at www. sven.fi.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name “SVEN SB-2150A” and the “connect”
command on the source.