Sven SB-2150A, Руководство пользователя

Страница: 6 / 26

ENG
6
Soundbar with Wireless
Subwoofer
• To connect Speaker System to PC and TV use optical cable (included).
• Connect the power cable with the power adapter (included). Then connect it to the the DC IN
j jack of the soundbar (see Fig. 4).
• Connect the subwoofer power cable to the mains oulet.
• Connect the power adapter to the mains oulet. The power LED on the front control panel
will light up. Then switch on the subwoofer with the POWER switch (ON position) on the sub -
woofer rear panel.
• To switch on the soundbar, press button a on the control panel or button a on the remote
control. To switch the soundbar off, press the Standby mode button again.
• At the first turn on, the soundbar and subwoofer will automatically establish a connec -
tion between themselves. As soon as the connection is installed, the LED on the rear panel
of the subwoofers will change the light from intermittent to permanent.
• Select the signal source.
• Adjust the master volume with the e and h buttons on the RC.
• Select the equalizer option, by pressing the n button on the RC.
• After using the MSS, mind to switch it off using button a on the RC, switch off the subwoofer
using the POWER switch (OFF position) on the subwoofer rear panel and unplug the power
adapter from the socket.
Fig. 4. Connection diagram
Soundbar
Mini-jack to mini-jack
signal cable
Laptop
Mobile
device
Sockets
Power
adapter
Optical cable
HDMI (ARC)
cable
(not included)
USB flash
PC
Subwoofer PC