Portable Speaker System with
Bluetooth and FM-radio
ENG
4
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using micro USB to USB cable
(included). During battery charging the indicator
j
is red. Indicator
j
goes out when the battery
is charged.
•
The battery is used in the speaker system as an integral part of the device, therefore do not try to
extract or replace it, because this can result in the warranty cancellation or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to compatible
devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic
devices can interfere with the signal transfer.
•
Turn on the speaker system Bluetooth mode – press button
a
several times until display shows
«bt» inscription.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «SVEN PS-490, SVEN PS-500, SVEN PS-550», massage will be
displayed on the screen which is to be connected to*.
•
When connection is successful, there will be a short beep and the indication of the search mode on
speaker system is over**.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose the item name «SVEN PS-490, SVEN PS-500, SVEN PS-550» and
the “connect” command on the source.
Fig. 2. Connection diagram
USB to micro USB
power cable
USB jack
Mini-jack to mini-jack
signal cable
Mobile device
PC
Socket
