Operation Мanual
ENG
MS-908
2.1
Multimedia Speaker System
4
Fig. 2. Connection diagram
2RCA tо 2RCA
signal cable
2RCA tо mini-jack
signal cable
PC
Player
Control panel
a
VOLUME: Master volume control
b
BASS: Bass level control
c
AUDIO INPUT: Audio input
d
Power switch
e
AUDIO OUTPUT: audio output for satellites
f
Power cord
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one
meter away. The subwoofer emits non-directional sound, therefore
it can be located in any place of the room where it sounds the best.
•
Place MSS far away from monitors and TV sets, as insignificant
image distortion in these supersensitive devices is possible.
MSS сonnecting and control
WARNING! All components should be switched off before
connection.
•
Connect the built-in audio cables to the audio outputs
e
on the rear panel of subwoofer (see Fig. 2).
•
To connect the MSS to a PC or МР3/CD player, use the 2RCA – mini-jack signal cable (included). For
this at first plug the RCA jacks of the signal cable into input connector AUDIO INPUT of subwoofer
c
,
and another mini-jack of cable should be plugged in Ø 3.5 mm LINE OUT port of the computer sound
card or audio output of player as shown in Fig. 2.
Fig.1. Control panel
CD
DVD
