background image

ENG

4

Electric kettle

• 

Do not place the kettle near a heat source (as the body of the appliance may be damaged).

• 

Ensure that no water gets into the electrical connections on the power stand, wire, plug, or switch.

• 

The power stand can only be used with the Sven kettle of this model, just as the kettle can only be used on 

the stand included in the kit.

• 

At the time of putting the kettle on the stand, the power button should be in the OFF (О) position. 

• 

The formation after boiling on the base of the kettle is allowed a small amount of water (up to 1 g), which is a 

consequence of steam condensation during operation of the device.

• 

Never leave the appliance unattended when in use. 

5. SCOPE OF USE

• 

The device is intended for domestic and similar use in accordance with this manual. 

• 

The device is not intended for industrial and commercial use.

 

The manufacturer is not liable for damage resulting from incorrect or unforeseen use of this instruction.

6. DEVICE DESCRIPTION

a

 

Lid

b

 

Lid opening button 

c

 

On/Off button (I/O)

d

 

Handle

e

 

Kettle

f

 

Water gauge

g

 

Вacklight

h

 

Stand

7. PREPARATION AND OPERATION 

 

Before first use, unpack the kettle and remove all the 

packing materials inside box and kettle. Remove from kettle 

e

 

all stickers. 

• 

Save original packaging.

 Check equipment. Read the security guidelines.

 Inspect the kettle for defects.

 

Put stand 

h

 on flat, stable, hard surface.

• 

Click on lid opening button 

b

 and lift it.

• 

Rinse the container several times with cold water. You can 

use non-abrasive and non-aggressive means.

 

Fill the kettle with the required amount of water. Ensure 

that the water level during filling is always higher than 

min

 

and lower than 

max 

marks.

• 

Close kettle lid 

a

 to complete fixation.

 

Put the kettle on stand 

h

. Insert the plug into the outlet. When using an extension cord, make sure that it is 

with a ground line.

 

Turn the kettle on using the ON/OFF 

c

 switch (I/O). Вacklight 

g

 will light up. The kettle turns off 

automatically when water boils. The switch automatically returns to the OFF(О) position, backlight 

g

 goes out. 

Boiling can be stopped by turning the power button to the OFF(О) position.

• 

Make sure the kettle is turned off, or turn it off manually before removing the device from the stand to pour 

water. 

 

The hot water obtained as a result of the first two boiling is not recommended to drunk, you can use it for 

domestic needs.

• 

It is not recommended to boil the same water twice. 

• 

Pour water out of the kettle gradually. Remember, there is boiling water inside the kettle. Always hold the 

kettle by the handle only (it does not heat up during boiling).

Fig. 1.

a b

c

g

d

e

f

h

Отзывы: