5
grand
ENG
Operation Manual
8. REMOTE CONTROL
a
STANDBY: standby mode button
b
0-9: numeric keyboard buttons for selecting preset
radio stations
c
ST: MONO/STEREO mode selection button
d
MEM: button for presetting radio stations in the
memory of the tuner
e
INPUT: audio source selection button
f
MODE +/–: buttons for setting parameters
(balance, treble and bass, headphone volume)
in various modes
g
MIC+/–: microphones volume control buttons
h
+/–: headphone volume control buttons
i
/–: reverberation level control buttons
j
MUTE: mute mode button
k
+10: multiple factor button for selecting preset
radio stations numbered 10 and up
l
/–»: radio frequency manual setting
buttons
m
PRESET AUTO: auto setting button
n
Dž
H+/–: preset stations successive selection buttons
o
VOL+/–: master volume control buttons
Remote control battery installation
•
Open the battery compartment at the back of
the remote control.
•
Put in the CR2025 battery (included).
•
Close the battery compartment.
Notes:
• Before the
Н
rst switch-on of the device remove the protective
Н
lm from the remote
control battery compartment.
• Use the remote control at an angle not more than 30° at a distance not more than 5 meters.
• Direct the remote control at the IR receiver display on the active speaker.
• If the remote control does not work, check the battery or replace the discharged battery
with a new one.
• Remove the battery from the remote control, if you aren’t going to use it for a long time
(more than a week).
a
j
k
l
m
n
o
b
c
d
e
f
h
g
i
Fig. 4. Remote control
