ENG
8
Wireless Gamepad
If none of the above mentioned solutions removes the problem, please consult your nearest
authorized service center. Never try to repair the device on your own.
7. TROUBLESHOOTING
Problem
The gamepad does not work
normally after installation of
drivers on the PC.
Drivers can’t be installed on the
PC.
Some analog axis goes into
e
Ԛ
ect automatically.
After the gamepad is con-
nected, its driving program
can’t be found.
After entering the game,
vibration feedback function
operates automatically.
During the game vibration
feedback is insu
ԝ
cient.
Solution
ƴ
. Check whether the gamepad is connected properly to
your PC.
B. Make sure that all the settings in Game Controller are
installed and con
ԛ
rmed.
C. Check whether the settings of the gamepad are in con
Ԝ
ict
with other peripherals.
D. Restart your PC if the device still does not work normally.
Install DirectX 7.0 or higher.
The gamepad hasn’t been calibrated or the calibration
hasn’t been con
ԛ
rmed.
Enter My computer
о
Properties
о
Hardware
о
Device
manager and delete the corresponding equipment with «!»
mark and reconnect the gamepad to the PC. Then your PC
will
ԛ
nd the driving system.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set the force of feedback.
•
TURBO function (continuous shooting)
The Turbo function is designed to imitate multiple pressing with one-time pressing and holding of
any button. Press any button from 1 to 12 to activate the function, then, hold it and press the TURBO
button
b
. Now the button will function in the TURBO mode. Ful
ԛ
ll the similar actions as for
activation to cancel the TURBO function: press the button which works in the TURBO mode, hold it
and press the TURBO button
b
.
