Sven 431, Руководство по эксплуатации

Страница: 15 / 16

!
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «SVEN 431» massage will be displayed on the screen, which is to be
connected to*.
!
The indicator
c
lights continuously when connection is successful. If the connection fails, the
indicator
c
will ash blue and red.
* You might have to enter 0000 code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose only the item name and the connect command on the source.
Notes:
!
After using the MSS, mind to unplug it.
6. TROUBLESHOOTING
If none of the above methods can solve the problem, please seek professional advice at your
nearest service center.
!
Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound or there
is too quiet sound
of speakers.
Distortion of
sound.
Cause
The MSS isn t connected to a mains outlet.
The power switch is o .
Volume level is set at its minimum value.
Improperly connected audio source.
Large amplitude of the input signal.
Solution
Check the connection.
Turn on the switch.
Adjust the volume control knob.
Connect audio sources correctly.
Turn down the source volume
and the MSS volume.
Parameter, measurement unit
Output power (RMS), W
Frequency range, Hz
Speaker diameter, mm
Bluetooth operating range, m
Power supply, V
Dimensions (one speaker) (W × H × D), mm
Weight, kg
Value
6 (2 × 3)
80 20 000
Full-range Ø 75
till 10
USB/DC 5V
87 × 200 × 105
0.9
7. TECHNICAL SPECIFICATIONS
Notes:
Technical speci cations given in this table are supplemental information and
cannot give occasion to claims.
Technical speci cations and package contents are subject to change without
notice due to the improvement of SVEN production.
15
SVEN 431
ENG
Operation Manual